The main reason why machines were invented was to help human kind. They were made to share the load from humans and perform those tasks which were rendered impossible to perform. And thanks to development of technology, all of this is now possible. In a manufacturing industry, no matter what the required job is, if you have good machinery, then anything is possible. The industries may be different but big machines are constant. This has also helped in saving of ample of time and if we look at the overall scenario, then it is the manufacturing unit that gets benefited the most. Our main motive of increasing the productivity gets fulfilled. This thought also holds true for a crimping machine.
A crimping machine is a device which helps in compressing different objects with the main aim of joining them together. In this process, either one or both the objects are deformed. To make a good crimp, there is need of different parts that should work in tandem. Two of the components in this regards are Applicators and Motorized Pull Testers.
1. Applicators – applicators are considered as the heart of a crimping machine which shows how important they are in a crimping machine. The main work of an applicator is to fold and press the conductor wires into the terminal wing. Its minor job is to feed the terminal. There are various types of applicators and can be used according to the need of the user. Some of the types of applicators are mentioned below –
CIC Normal Applicators – they are applied for normal applicators. These types of applicators are used for side feed and end feed type of terminals. The advantage of using this applicator is that it is user friendly, simple in operation and economical.
Pneumatic Applicators – if there are terminals of higher pitch, then use of pneumatic applicators is suitable. For good performance, there is need for stabilized pneumatic supply.
Spiral Setting Applicators – these are advanced versions of applicators where crimp height is adjusted by using spiral discs. Stability along with good repeatability is what they are known for.
Large Terminal Applicators – mainly, their use is in battery. It is most suitable for large presses and loose terminal crimping. In addition, there is provision of spiral setting mechanism.
2. Motorized Pull Testers – to find out the joining strength between the terminal and the wire, it is essential to do the pull testing of the crimp. In earlier models, pull testing was done manually but the results were not reliable and there were jerks in pulling. Therefore motorized pull testers were used and are more reliable. There are four ranges of motorized pull testers – 0 - 50kg, 0 – 100kg, 0 – 200kg, 0 – 500kg. They have calibrated sensor and there is variable speed motor with the help of which pulling is done. If you want different speeds, then there is option for that too – 50 mm/min, 100 mm/min, 150 mm/min, 200 mm/min.
If you want to buy the best quality of applicators and motorized pull testers, then Regenato is there to help you. You will get reliable parts in low prices.
Competent Crimping Machinery Pvt. Ltd.
B-92, Sector 65, Noida 201301, UP, India
Phone No: +911204337663
Email Id: info@regenato.com
No comments:
Post a Comment